Beta-Cell

Demountable Cell for Liquids and Mulls

We've eliminated the nuts, bolts, and springs of the conventional designs. Assembly is accomplished by placing the sample between two crystal windows, separated by a spacer; dropping these into the hex holder and advancing the single threaded retainer until the assembly is seated. Uses inexpensive 25 x 4mm windows.

塗抹用可拆型液體樣品槽

Magnetic Film & KBr Pellet Holder for Dispersive FTIR

Magnetic holders are convenient for holding KBr pellets or thin polymer films. They are also useful for mounting a 13mm crystal that has been used as a microscope slide in a standard spectrophotometer sample compartment. The film sample, pellet or optic is held in place by a magnetized rubber plate. These holders fit the universal 2" x 3" slide mount in all spectrophotometers. Use of paper inserts (above) facilitates mounting small samples.

磁性薄片固定架

Crystal Polishing Kit

 The Crystal Polishing Kit contains everything needed by the spectroscopist for repolishing and buffing most infrared transmission crystals and ATR Prisms including KRS-5. Two ground glass discs are provided - one for fine grinding and the other to which self-stick polishing pads may be affixed. Supplied with the Polishing Kit are 400 and 600 grinding compound, Cerium Oxide polishing compound, KRS-5 polishing compound (idea for resurfacing KRS-5 crystals), flnger cots, 3 camel hair brushes, 2 polishing pads, 2 ground glass plates, 5 polyethylene squeeze bottles with the above mentioned compounds contained therein, fitted mahogany base and instructions.

　鹽片拋光組