| Phase |
Description |
Phase Attribute |
Polarity |
Operation Temp |
|
BP1
|
100%Dimethyl
polysiloxane |
General-purpose column;
low bleed |
Non-polar |
0.1-1.0um -60C to 340/360C;
1.5-5.0um -60C to 280/300C |
| BPX1 |
100% dimensionally
stabilized
methylpolysiloxane |
Ideal for simulated distillations
(e.g. ASTM D2887 in the
petroleum industry) |
Non-polar |
0.1um film to 430C;
0.9um film to 400C;
2.65um film to 370C |
| BPX5 |
5% Phenyl
polysilphenylene-siloxane |
Ideal for GC-MS, ECD;
Ultra low bleed |
Non-polar |
-40C to 360/370C |
| BP5 |
5% Phenyl95%
Dimethyl polysiloxane |
General purpose column;
Low bleed |
Non-polar |
0.25-1.5um 340/350C;
>=1.5um 280/300C |
| HT5 |
5% Phenyl
polysiloxane-carborane |
High temperature;
Well suited to the petroleum;
C5-C120 anaylsis |
Non-polar |
Polyimide Clad 0.1-1.0um 10C
to 380/400C;
Aluminum Clad 0.1-0.5um 10C
to 460/480C |
| HT8 |
8% Phenyl
polysiloxane-carborane |
Ideal for PCB analysis;
Low bleed |
Non-polar |
0.1-1.0um -20C to 360/370C |
| BP10 |
14% Cyanopropylphenyl |
Used in environmental analysis;
Low bleed |
Moderately
polar |
-20C to 280/300C |
| BPX35 |
35% Phenyl
polysilphenylene-siloxane |
Ultra low bleed;
Ideal for pesticides/herbicides |
Moderately
polar |
0.1-1.0um 0C to 360/370C |
| BPX50 |
50% Phenyl
polysilphenylene-siloxane |
Ultra low bleed;
Ideal for pharmaceuticals |
Moderately
polar |
0.1-1.0um 0C to 360/370C |
BP20
(WAX) |
Polyethylene glycol |
Suitable for use in GC-MS systems;
alcohols/free acids |
Polar |
0.1-<1.0um 20C to 260/280C;
>=1.0um 240/260C |
| BP21 |
Polyethylene
glycol (TPA treated) |
Bonded FFAP; alcohols/free acids |
Polar |
0.1-1.0m 35C to 240/260C |
| BPX70 |
70% Cyanopropyl
polysilphenylene-siloxane |
Optimized for FAME; Low bleed |
Highly polar |
0.1-1.0um 50C to 250/260C |
| BPX608 |
35% Phenyl
polysilphenylene-siloxane |
Optimized for separation of EPA 608
Organics Chlorinated Pesticides |
Moderately
polar |
0C to 360/370C |
| BP624 |
Cyanopropylphenyl
Dimethyl polysiloxane |
Optimized for analysis of EPA
drinking water target components |
Slightly
polar |
1.4um - 0C to 230/240C;
1.8um - 0C to 230/240C;
3.0um - 0C to 230/240C |
BP1-
PONA |
100% Dimethyl
polysiloxane |
Optimized for the analysis of
gasoline hydrocarbons |
Non-polar |
-60C to 280/300C |
SolGel-
1ms |
100% Dimethyl
polysiloxane in a
Sol-Gel matrix |
High temperature inert
GC-MS column |
Non-polar |
0C to 380C |
SolGel-
WAX |
Polyethylene glycol
in a Sol-Gel matrix |
High temperature inert
column Ideal for GC-MS |
Polar |
30C to 300C |
| CYDEX-B |
Permethylated
Beta-cyclodextrin
in OV1701 |
Chiral separations |
- |
30C to 220/240C |
