Characteristics of Rheodyne Manual Sample Injectors
Model1	Scale	Partial Filling Volumes (Range)	Sample Loop Sizes (Range)	Main material	Liquid- contact Materials	Max. MPa2	Max. T ℃	MBB3	Type and Capabilities	切換示意圖
7725, 7725i	Analytical	1uL ~ 2.5 mL	2uL ~ 5.0 mL	316 SST	316 SST, Vespel, ceramic, PEEK	48	80o	Yes	Dual Mode Can load the loop by two methods： (1) Partial filling syringe determines volume without wasting sample (2) Complete filling loop determines volume by overfilling loop	A
7125			5uL ~ 5.0 mL			48	80o	No
7125-081		Not Applicable	10uL ~ 5.0 mL	Titanium	Titanium, Tefzel, ceramic, PEEK	34	50o	－
9725, 9725i		1uL ~ 5.0 mL	2uL ~ 10 mL	PEEK	PEEK, Tefzel, ceramic	34	50o	Yes
8125 (Low dispersion)	Micro	0.1uL ~ 500uL	5uL ~ 1.0 mL	316 SST	316 SST, Vespel ceramic, PEEK	48	80o	No
3725,3725i	Preparative	100uL ~ 10mL	2.0 mL  ~ 20 mL	PEEK	PEEK	28	50o	Yes
3725(i)-038				316 SST	316 SST, PEEK	34	50o	Yes
7010	Analytical	Not Applicable	5uL ~ 5.0 mL	316 SST	316 SST, Vespel	48	150o	No	Single Mode Can load the loop by one method：Complete filling loop determines volume by overfilling loop	B
7010-087			10uL ~ 5 mL	Titanium	Titanium, Tefzel	34	80o	No
9010			5uL ~ 10 mL	PEEK	PEEK, Tefzel, ceramic	34	50o	No
7410 (Internal Loop) (Low dispersion)	Micro		0.5uL ~ 5uL	316 SST	316 SST, Vespel	48	150o	No		C
7520 (Internal chamber)			0.2uL ~ 1uL	316 SST	316 SST, Vespel	48	80o	No		D

1. Models with an “i” suffix have a built-in position sensing switch. Model 8125 and 9010 each has a built-in switch.

2.This is the maximum pressure in MPa to which the valve can be adjusted. Some models are shipped from the factory set for lower pressures.

          1.0 MPa = 10 bar = 145 psi.

3.MBBTM (Make-Before-Break) is a patented Rheodyne design that provides uninterrupted flow when switching between LOAD and INJECT. MBB also greatly reduces transient pressure shocks.

<<回高效能液相層析儀(HPLC)>>   <<回HPLC用配件、耗材>>